You can also achieve this angle by pulling the feet of the ladder away from the wall about ¼ of the total length of the ladder.
On soft ground, flip the ladder feet up to expose the spurs and stomp on the bottom rung to penetrate the ground. On uneven ground, a ladder leveler is the only safe way to effectively extend one leg of the ladder. [4] X Research source If possible, you can also bolt a cleat into the ground behind the feet to aid against slipping.
If the ladder is fully extended, you may want to tie off the midsection as well.
Soft “mitts” that slip over the top of the side rails can provide extra grip and protect the surface from damage done by the ladder. Ladder stabilizers basically widen the points at which the top of the ladder rests. This can be useful to protect fragile siding or to clear the width of a window. Single support attachments are necessary whenever the ladder is leaned against a surface narrower than the width of the ladder, like a telephone pole. They mount to the ladder above the top rung between the two side rails.
Even if you are using wooden or fiberglass ladders, try to avoid coming into contact with any electrical wires.
