Use a pair of pliers to hold the key so you don’t burn your fingers.
The outline of the key will transfer to the sticky side of the tape. Leave a fingertip-sized bit of tape at the end of the key so it’s easier to remove.
Use rubbing alcohol to remove any residual char from the key. [4] X Research source
Be sure to place the tape away from any raised letters or numbers on the card otherwise it will be too thick to fit in the lock. Use a light-colored card so you can easily see the imprint of the key.
It doesn’t matter how the large end of the key is shaped. As long as the teeth are cut correctly, the key should work. Hold the original key up to the one you’re cutting out to compare the teeth.
Don’t force the key to turn or else it may bend or break.
Some locksmiths may be able to make copies of a key just from a picture of the original.
Older vehicles may just need a copy of the key without a chip. Ask the dealership what is required for your specific make and model.
Make sure the key design you choose matches the thickness of the original key, or else it will not fit in the lock.
Use the code cut of your key for a replacement, the keys produced from codes would be factory cuts on the new key, not a duplicate. Find a KeyMe location on their website: https://www. key. me/ Scan the key into the phone app for ordering a spare key at home.
