Lineman’s pliers are also known as “side cutting” pliers.
Since they have a narrow tip, long-nose pliers also work great to bend loops into wires and attach multiple wires together. If you are cutting wire for a jewelry project or trimming guitar strings, this may be a good option.
Diagonal cutting pliers are also widely used for removing pins and nails as well. If you want to cut a wire hanger, for example, this is a good option. Diagonal pliers are also called “dikes. “[5] X Expert Source Ryaan TuttleHome Improvement Specialist Expert Interview. 30 July 2021.
You can also use end-cutting pliers to cut nails and rivets.
It is also easy to slip and cut yourself when cutting wire with a pair of scissors, since the blade may not grip the wire as well as a set of pliers.
If you’d like, you can also wear protective gloves to prevent poking your fingers with the wires. While this is not required, it can be helpful if cutting lots of wire at the same time.
If you are leaning forward or backward and happen to lose your balance, you have a greater chance of hurting yourself with your tool or hitting your head.
For instance, if you are cutting the wires in your computer, make sure the computer is powered off before you begin.
This way, you can have a smaller piece of wire to size and shape as needed.
Additionally, apply a drop of oil to your tool every 1-3 weeks to keep them in good condition. The oil makes the hinge work better over time.
If you hold the tool incorrectly, you can slip when you make your cut, injuring yourself or damaging the wire.
The inner snipping section is slightly different depending on your tool. For instance, diagonal cutting pliers will have a diagonally-shaped blade.
If you do not cut the wire at a right angle, you may damage the wire and it may not work any longer.
If you cut the wire too forcefully, the tail of the wire may fly up into the air. If the wire does not cut entirely with 1 snip, open the handle of your tool and make another cut at a right angle.
